FAP-431F, HKShanhai Group Limited FAP-431F Indoor Wireless AP, Tri-radio 4×4 MIMO/internal antennas/802.3at PoE

FAP-431F Specification

Hardware

Hardware Type

Indoor AP

Number of Radios

3 + 1 BLE

Number of Antennas

5 Internal + 1 BLE Internal

Antenna Type and Peak Gain

PIFA:
4 dBi for 2.4 GHz, 5 dBi for 5 GHz

Frequency Bands (GHz)

2.400??.4835, 5.150??.250, 5.250??.350, 5.470??.725, 5.725??.850

Radio 1 Capabilities

Frequency Band: 2.4 GHz
Channel width: 4×4 20/40 MHz
Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024
MIMO chains: 4×4 service

Radio 2 Capabilities

Frequency Band: 5.0 GHz
Channel width: 4×4 20/40/80MHz and 2×2 160MHz
contiguous Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024
Mimo chains: 4×4 service

Radio 3 Capabilities

Frequency band: 2.4/5.0 GHz MIMO chains: 1×1 frequency scanning

Maximum Data Rate

Radio 1: up to 1147 Mbps
Radio 2: up to 2402 Mbps
Radio 3: scan only

Bluetooth Low Energy Radio

Bluetooth scanning and iBeacon advertisement @ 6 dBm max TX power

Interfaces

1x 100/1000/2500 Base-T RJ45,
1 x 10/100/1000 Base-T RJ45,
1x Type A USB, 1x RS-232 RJ45 Serial Port

Power over Ethernet (PoE)

802.3at PoE default
1 port powered by 802.3at or 2 ports powered by 802.3af
– Full System functionality + USB support 1 port is connected to 802.3af – No USB support, Operate
in 2×2 mode with reduced power R1/R2 17dBm(Tx power)

Simultaneous SSIDs

Up to 16 (14 if background scanning enabled)

EAP Type(s)

EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST

User/Device Authentication

WPA?? WPA2?? and WPA3??with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist and allowlist

Maximum Tx Power (Conducted)

Radio 1: 2.4 GHz 24 dBm / 251 mW (4 chains combined)*
Radio 2: 5 GHz 23 dBm / 200 mW (4 chains combined)*
Radio 3: NA

Kensington Lock

Yes

IEEE Standards

802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11w,
802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3bz

SSID Types Supported

Local-Bridge, Tunnel, and Mesh

Per Radio Client Capacity

512 clients per radio (Radio1 and Radio2)

Cellular Co-existence

Yes

LED Off Mode

Yes

Reset Button

Yes

Advanced 802.11 Features

OFDMA

Yes (UL and DL)

2.4 GHz OFDMA

Yes

Spatial Reuse (BSS Coloring)

Yes

UL MU-MIMO 802.11ax mode

Yes

DL-MU-MIMO

Yes

HE-MU-MIMO

Yes

Enhanced Target Wake Time (TWT)

Yes

ZeroWait DFS/Agile DFS

No

Wireless Monitoring Capabilities

Rogue Scan radio modes

Background, Dedicated

WIPS / WIDS radio modes

Background, Dedicated (recommended)

Packet Sniffer Mode

Yes

Spectrum Analyzer

Yes

Dimensions

Length x Width x Height

8.27 x 8.27 x 2.22 inches (210 x 210 x 56.5 mm)

Mounting Options

Ceiling, T-Rail, and Wall

Environment

Power Supply

SP-FAP400-PA-XX or GPI-130

Power Consumption (Maximum)

24.5 W

Humidity

5 – 90% non-condensing

Operating / Storage Temperature

32??13°F (0??5°C) / -31??94°F (-35??0°C)

Directives

Low Voltage Directive ??RoHS

UL2043 Plenum Material

No

Mean Time Between Failures

> 10 Years

Surge Protection Built In

Yes

Hit-less PoE Failover

Yes