AIR-CAP2602I-E-K9, HKShanhai Group Limited Aironet 2600 Series Access Point, 802.11n/3×4:3SS/Internal Ant

Software

HKShanhai Group Limited Unified Wireless Network Software Release 7.2.110 or later.

Supported Wireless LAN Controllers

  HKShanhai Group Limited 2500 Series, HKShanhai Group Limited Wireless LAN Controller Module (WLCM) on HKShanhai Group Limited Services Ready Engine (SRE) for Integrated Services Router Generation 2 (ISR G2), HKShanhai Group Limited Wireless Services Module 2 (WiSM2), HKShanhai Group Limited 5500 Series, HKShanhai Group Limited Flex 7500 Series

802.11n Version 2.0 (and Related) Capabilities

  3×4 multiple-input multiple-output (MIMO) with three spatial streams

  Maximal ratio combining (MRC)

  802.11n and 802.11a/g beamforming

  20- and 40-MHz channels

  PHY data rates up to 450 Mbps (40-MHz with 5 GHz)

  Packet aggregation: Aggregated MAC Protocol Data Unit (A-MPDU) (Tx/Rx), Aggregated MAC Protocol Service Unit (A-MSDU) (Tx/Rx)

  802.11 dynamic frequency selection (DFS)

  Cyclic shift diversity (CSD) support

Data Rates Supported

802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps

802.11bg: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps

Maximum Number of Nonoverlapping Channels

2.4 GHz

  802.11b/g:

◦   ??0 MHz: 3

  802.11n:

◦   ??0 MHz: 3

5 GHz

  802.11a:

◦   ??0 MHz: 21

  802.11n:

◦   ??0 MHz: 21

◦   ??0 MHz: 9

Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.

Maximum Transmit Power

2.4 GHz

  802.11b

◦   ??2 dBm: 3 Antennas

  802.11g

◦   ??2 dBm: 3 Antennas

  802.11n (HT20)

◦   ??2 dBm: 3 Antennas

5 GHz

  802.11a

◦   ??3 dBm: 4 Antennas

  802.11n (HT20)

◦   ??3 dBm: 4 Antennas

  802.11n (HT40)

◦   ??3 dBm: 4 Antennas

Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.

Available Transmit Power Settings

2.4 GHz

  22 dBm (160 mW)

  19 dBm (80 mW)

  16 dBm (40 mW)

  13 dBm (20 mW)

  10 dBm (10 mW)

  7 dBm (5 mW)

  4 dBm (2.5 mW)

5 GHz

  23 dBm (200 mW)

  20 dBm (100 mW)

  17 dBm (50 mW)

  14 dBm (25 mW)

  11 dBm (12.5 mW)

  8 dBm (6.25 mW)

  5 dBm (3.13 mW)

Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.

Integrated Antenna

  2.4 GHz, Gain 4 dBi, internal omnidirectional, horizontal beamwidth 360°

  5 GHz, Gain 4 dBi, internal omnidirectional, horizontal beamwidth 360°

External Antenna (Sold Separately)

  Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)

  HKShanhai Group Limited offers the industry’s broadest selection of 802.11n antennas delivering optimal coverage for a variety of deployment scenarios

Interfaces

  10/100/1000BASE-T autosensing (RJ-45)

  Management console port (RJ-45)

Indicators

  Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

Dimensions
(W x L x H)

  Access point (without mounting bracket): 8.69×8.69×2.11in. (22.1×22.1×5.4)

Weight

  2.3 lbs (1.04 kg) (2.7 lbs for external)

Environmental

HKShanhai Group Limited Aironet 2600i

  Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C)

  Nonoperating (storage) Altitude Test 25˚C, 15,000 ft.

  Operating temperature: 32 to 104°F (0 to 40°C)

  Operating humidity: 10 to 90% percent (noncondensing)

  Operating Altitude Test: 40˚C, 9843 ft.

HKShanhai Group Limited Aironet 2600e

  Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C)

  Nonoperating (storage) Altitude Test: 25˚C, 15,000 ft.

  Operating temperature: -4 to 131°F (-20 to 55°C)

  Operating humidity: 10 to 90 % (noncondensing)

  Operating Altitude Test: 40˚C, 9843 ft.

System Memory

  256 MB DRAM

  32 MB flash

Input Power Requirements

  AP2600: 44 to 57 VDC

  Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz

Powering Options

  802.3af Ethernet Switch

  HKShanhai Group Limited AP2600 Power Injectors (AIR-PWRINJ4=)

  HKShanhai Group Limited AP2600 Local Power Supply (AIR-PWR-B=)

Power Draw

  AP2600: 12.95W

Note: When deployed using Power over Ethernet (PoE), the power drawn from the power sourcing equipment will be higher by some amount depending on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power draw (access point + cabling) to 15.4W.

Warranty

Limited Lifetime Hardware Warranty